See our Testimonials page, we have many happy clients
We offer the highest standard nameplates
We also create door plates
ACRYLIC FREE STANDING DESK PLATE HOLDERS
TENT STYLE ACRYLIC DESK

Plastic free standing tent style desk sign holders.

If you are on a tighter budget, then consider these TRANSPARENT plastic desk  name plate sign holders. They are durable and impact resistant.

RE-USABLE  and changeable tent V style, and double sided for you to insert your own printed card/paper label inserts as and when you need just using a normal office printer.

Standard sizes:    210mm x 50mm     210mm x 60mm     210mm x 75mm and our largest 297mm x 105mm. All these plastic desk plate sign holders are great for conferences and meeting rooms.

Ours are not thin and flimsy but thick and strong so consider this when thinking about choosing other cheaper ones out there.

Other sizes smaller can be made to order.

PRICES from -  £2.75 each, based on 210mm x 50mm size.

DISCOUNTS available on larger quantities.

Low minimum order qty of just 25.

Fast delivery for all our desk plate holders within 5 days.

WHITE BLANK PERFORATED LABEL INSERTS AVAILABLE ON ALL OUR 210mm x 50mm and 210mm x 40mm name plate holders.  See home page for prices.

 

      EMAIL:     info@anthemsigns.co.uk

 

 

ACRYLIC - STYLE 3 PC COMPUTER NAME HOLDERS
STYLE 3 - CLEAR MONITOR NPH

Re-usable Name plate sign holders for top of your computer monitors

Style 3 -   is a angled single sided alternative holder made of clear acrylic that you can insert or remove your own printed paper/card inserts as and when required. Approx  size 210mm wide  x 42mm high with a self adhesive base for affixing to the top of your PC computer or desk screen partitions.

WE PROVIDE THE HOLDERS

You Make your own name plate inserts - Its more cost effective.

All our name plate or sign holders in this range are interchangeable or re-usable and you can slot or slide in your own printed inserts as and when. However the most popular by far is this style 3  and 4A for attaching to the top of PC computer monitor display screens.

Essentially single sided, but many of our customers say that it can be used as double sided too.
Inexpensive, hard wearing and impact resisitant and like many of others in our range fits the office desk profile very well.

Standard size:     210mm wide to accept up to a 40mm high card/paper insert.
Minimum order qty is 30 off.

PRICES from  £2.88 each   210mm x 42mm size.

DISCOUNTS available on larger quantities.

Other sizes can be made to order at extra cost.

FAST DELIVERY -  Within a few days.

PLEASE NOTE THAT ALL OUR ACRYLIC HOLDERS HAVE A SELF ADHESIVE BASE AS STANDARD, BUT WE ALSO OFFER VELCRO, OR MAGNETIC FIXING AT  A SMALL ADDITIONAL COST..

Tel:  01280 705672

Email:    info@anthemsigns.co.uk

 

Style 4 - PVC COMPUTER NAME HOLDERS
STYLE 4 - PVC  monitor name plate sign holder

Name sign holders for top of your computer monitor display screen

Style 4 -  Is another interchangeable and removable option with a clear PVC upright name insert holder that is complete with a holder attachment.

Its vertical upright position, allows it to be more visible and is capable of accepting paper inserts on both sides of the holder.

This affixes to the top of the PC computer monitor or display screen by self adhesive but 2 part hook and loop velcro is also available at extra cost. This can allow the holder to be moved to any similar desk or office computer display screen.

Standard Sizes:   210mm wide x 50mm high  or 210mm x 60mm.

Other lengths, shorter or longer available. Please request a price.

Minimum order qty is 30 off.

PRICES from -  £2.75 each     210mm wide x 50mm high, self adhesive base.

DISCOUNTS available on larger quantities over 100

FAST DELIVERY - Within 5 days.

All prices add carriage and vat.

Tel:   01280 705672

 

 

STYLE 4A - ACRYLIC UPRIGHT RE-USABLE NAME HOLDERS
Style 4A - Clear acrylic

Name plate sign holders for top of Computer monitor or display screens

STYLE 4A -  RE-USABLE COMPUTER MONITOR NAME PLATE INSERT HOLDER

We are always trying to develop new products and due to customer requests we have now developed the style 4A in clear acrylic.

Like the style 4 it is double sided, but instead of pvc it is made of crystal clear acrylic and again supplied with a special self adhesive attachment to fix to the top of your computer monitor or desk screen partitions.

It is designed to be a re-usable and interchangable name insert holder, that you insert your own printed paper or card, giving you more control over your staffing changes. This can be achieved by simply using a standard office laser or injet printer.

  •   Impact resistant
  •   Side and top loading
  •   Chic and modern look 
  •   Availabe in 2 sizes - 210mm x 50mm,  210mm x 60mm.
  • Also easily transferable or removable to other similar desking endvironments.

Minimum order qty is 30 off.

PRICES from - £3.75 each,   210mm x 50mm size.

DISCOUNTS available on larger quantities.

FAST DELIVERY - Within 5 days.

Request a quotation on:   01280 705672

Email:   info@anthemsigns.co.uk

 

 

 

 

Style 8 - DOUBLE SIDED ACRYLIC NAME HOLDER
STYLE 8 - ACRYLIC DOUBLE SIDED MONITOR NAME PLATE HOLDER

Versatile name plate sign holders for PC monitor display screens or or desk screen dividers.

STYLE 8   

A durable modern look, TENT STYLE double sided INTERCHANGEABLE  name sign holder. In clear acrylic finish with a special acrylic attachment for fixing to the top of either a computer monitor screen, OR office screen divider panels.
Comes complete with base clip attachment.

 

As an added bonus with this style you can detach the name plate from its clip holster and simply use as a free standing desktop option.
This enables you to move it around to any office conference or meeting room and replace it back into its clip holster as needed.

Popular Standard size:   210mm wide to take a 50mm high insert.

Minimum order qty is 25 off.      

PRICES from -  £4.00 each,  

DISCOUNTS available on larger quantities

Optional standard sizes:
210mm wide to take a 60mm high insert,

 

 

 

 

STYLE 11 - RAISED & CLIP ON
STYLE 11 - RAISED ROTARY CLIP ON MONITOR NAME PLATE HOLDER

Easy clip on plastic desk name plate holder

STYLE 11 -  CLIP ON RE-USABLE MONITOR NAME PLATE INSERT HOLDERS

We have been asked on numerous occasions if we have a name plate holders that could clip onto computer monitor display screens, but also one that is raised above the computer screen so that it is visible from afar.

We have risen to this challenge and now offer our style 11.

A simple solution with a combined clip and a clear PVC  insert holder that can rotate 360 degrees, and is raised  approx 15cm above the monitor top surface.

1.  Re-usable, to  slide in your own printed card OR paper label inserts.

2.  Will clip onto any modern 'flat screen' computer monitor up to 32mm thick

3.  Can be positioned on left, right or centre of the computer screen.

4.  Standard size holders:      210mm x 50mm, 
                                                  250mm x 50mm,

Other sizes may be available, please enquire.

This particular one has flexibility of use in that it can quickly and easily be removed and placed on similar computer desk monitors anywhere in your office, floor or building.

Min order quantity is 30 off

PRICES from  £3.75 each     210mm x 50mm size.
Discounts available for larger quantities.

Telephone for more information  or email:  info@anthemsigns.co.uk

 

STYLE 14 - TOBLERONE DESK NAME CARD HOLDERS
Style 14 - Toblerone name card holders

Style 14 - Clear acrylic re-usable desk name card holders.

This holder is similar in function as our TENT Style desk plate holders in the clear acrylic finish.

Its popular toblerone shape with a flat base, enables this holder to sit perfectly on any flat surface.  Typically used on desk or tabletops with the hotel and hospitality sector, but of recent years has found its place within office conference and meeting rooms.

This hard wearing and attractive name card holder accepts a printed name insert on one side only (single sided) although some organisations use it in a double sided capacity.

Our most popular size is 210mm wide to take a 50mm high insert.

Telephone:   01280 705672 OR Email:  info@anthemsigns.co.uk

 

 

FLAT CLEAR ACRYLIC NAME INSERT HOLDER
ACRYLIC FLAT INSERT HOLDER

Clear acrylic Door, wall or desk screen partition mounted name insert holder.
A re-usable, interchangeable and durable name plate holder. Change your printed insert details as and when needed.

 

ACRYLIC FLAT  NAME PLATE INSERT HOLDERS - If a hookover is not to your liking, then we have re-usable  flat panel name holders with a self adhesive back fixing. They can affix to the side or front Face of any desk screen or cubicle workstation screen panel. It can also be mounted on any flat surface such as doors and walls etc..

A modern modestly priced clear transparent plastic holder, with top and side loading application. 210mm wide (to take a 50mm high card or paper name insert) with a self adhesive back fixing that comes as standard. 

A choice of optional fixing on back, either  Velcro hook and loop or magnetic at additonal cost.

Minimum order qty is 10

PRICES from -  £3.95 each,  

Discounts available on larger quantities.

All prices plus carriage and VAT. 

 

Style 25 - RAISED HOOK ON DESK SCREEN NAME PLATE HOLDERS
Style 25 - RAISED ACRYLIC SCREEN HOOKOVER HOLDER

BEST VALUE  Desk screen divider name insert holder

 

NEW - RAISED DESK SCREEN HOOK on RE-USABLE NAME PLATE INSERT HOLDERS

Style 25 - CLEAR ACRYLIC -  If you are looking for a name plate holder that is raised above the top of the desk screen partition, then this is the one for you. It has a compact look and feel, but fulfills its function perfectly. It has a single or double sided insert function. (for your own printed insert use on one or both sides.)

These holders have a raised elevation above the top of your desk screen dividers or panels for better visability.

Slide in your own printed card or paper inserts as and when required.  Fits snugly over your desk screen partition divider panels.  Just let us have the thickness of your divider panels as we make these to fit.

Standard sizes:    210mm wide to take up to a 50mm card/paper insert.

Other bespoke sizes made to order at extra cost.. PLEASE ENQUIRE.

Minimum order qty is 30 or more off.

 

DISCOUNTS available on larger quantities.

WHITE BLANK PERFORATED NAME LABEL INSERTS AVAILABLE ON ALL OUR 210mm x 50mm and 210mm x 40mm name plate holders.  See home page for prices.

 

OUR BEST VALUE HOOK OVER RAISED STYLE

Tel:  01280 705672

                  

 

Style 26 - CLASSIC HOOK OVER desk screen name label holder
Style 26 - Clear acrylic hook over name insert holder

BEST VALUE - Hook over desk screen partition name insert holder.

Style 26 - CLASSIC ALL CLEAR ACRYLIC HOOK OVER NAME INSERT HOLDER

This has been a popular choice for some time with its crisp, clean modern look.
Pandering to all types of office desk screen partitions, desk cubicles, privacy screens and the like.

Like other name insert holders in this range, it is:

1. Re-usable and has a interchangeable function
2. Crystal clear transparent acrylic finish
3. Hooks over the top of your desk screen divider or partitions
4. Available in a choice of single or double sided options.

Just tell us the thickness of your desk screen divider/partition as we make these to fit.

Standard Size:     210mm wide name plate holder to take a 50mm high label insert.

Minimum order qty of 30 off.
Single sided option also available.

DISCOUNTS available on larger quantities.

PACKS  OF WHITE BLANK PERFORATED LABEL INSERTS ARE AVAILABLE FOR THESE  HOLDERS,  210mm WIDE.  See home page for prices and more information.

Carriage and Vat to be added to prices.

FAST DELIVERY - Typically within 7 - 10 days.

For a prompt quotation call:   01280 705672

Email:   info@anthemsigns.co.uk