See our Testimonials page, we have many happy clients
We offer the highest standard nameplates
We also create door plates
NAME PLATES FOR COMPUTER MONITORS

RE-USABLE PC COMPUTER MONITOR NAME PLATE HOLDERS 

We are always trying to develop new products to our range and so we can now offer many office computer nameplate re-usable holders.  They are all slide in re-usable  nameplate holders  that you can remove and change the details yourself as required. Various styles attach to the top of a PC computer by self adhesive,velcro.or magnetic attachments  Perfect for HOT DESKS, call centres Banking and Finance, Travel and  Finance industries.

Also Ideal for, communal offices, the Airline Industry and onsite Emergency strategic and operational planning setup's.
They continue to be popular within the Business & Finance sector, especially within the City of London and within national call centres..

INSERT CARD AND TEMPLATES

To help with creating your own printed inserts, we can supply the paper inserts on a A4 perforated sheets, You simply feed the blank sheets into any laser or inkjet printer, and using your own desktop publishing software or similar, you can create your own name inserts with or without corporate logo's or special graphics.

A4 perforated Insert sheets(210mm x 50mm) 6 to a sheet are available in packs of 20 @ £9.20 per pack.

We can also supply you with a basic template via email, FREE OF CHARGE to set out your own simple details such as a persons name and job title.

We currently offer 7 different styles of re-usable desk name plates just for your computer monitor screens, VDU or electronic display screens.

 

Tel:  01328 701621 to place an order.
Email:    name-plate-holders@fireflyuk.net
 

 

style 3

Style 3 -   is a single sided  economy alternative holder made of clear PVC that you can insert or remove your own printed paper/card inserts as and when required. Approx  size 210mm wide  x 42mm high with a self adhesive base for affixing to the top of your computer computer.

style 4

Style 4 -  Is a similar option with a clear PVC upright name plate panel holder that is complete with a separate holder attachment.

Its vertical upright position, allows it to be more visible and is capable of accepting inserts on both sides of the holder.

This affixes to the top of the PC computer monitor by self adhesive but velcro is also available at extra cost.

Sizes  210mm x 42mm OR  210mm x 50mm.

style 4a
STYLE 4A acrylic monitor name plate holder

NEW-  STYLE 4A RE-USABLE MONITOR NAMEPLATE HOLDER

We are always trying to develop new products and due to customer requests we have now developed the style 4A in clear acrylic.

Like the style 4 it is double sided, but instead of pvc it is made of crystal clear acrylic and again supplied with a special self adhesive attachment to fix to the top of your computer monitor.

It is designed to be a re-usable or interchangable name plate holder, that you insert your own printed paper or card inserts, giving you more control over your staffing changes. This can be achieved by simply using a standard office laser or injet printer.

  •   Impact resistant
  •   Side or top loading
  •   Chic and modern look 
  •   Availabe in 3 sizes - 210mm x 50mm,  210mm x 60mm and 210mm x 75mm.

Other sizes can be made to order on request.

style 5

Style 5 -  A  sturdy heavy duty aluminium and PVC combination double sided RE-USABLE nameplate holder.
210mm x 50mm T shape with self adhesive standard base fixings or optional 2 part magnetic attachment. 

Just slide your own printed card/paper insert into the holder on 1 or both sides.

STYLE 8 - Monitor name plate Holder
STYLE 8 - TENT STYLE MONITOR

CLEAR ACRYLIC STYLE - STYLE 8
Another alternative when deciding on your slide in  re-usable name plate holder for your office computers.

  • Tent style
  • Double sided
  • Size:   210mm wide to take a 50mm high insert
    supplied with a clear self adhesive attachment holder to fix to top of computer.  For the top of computers that are approx 20-25mm or more deep.
  • Low minimum order qty of just 30 or more off.
     


 

STYLE 11 - RAISED CLIP ON NAME PLATE HOLDER
STYLE 11 - CLIP ON MONITOR NAME PLATE HOLDER

STYLE 11 -  CLIP ON RE-USABLE MONITOR NAME PLATE HOLDERS

We have been asked on numerous occasions if we have a name plate holders that could clip onto computer monitor display screens, but also one that is raised above the computer screen so that is is visible from afar.

We have risen to this challenge and now offer our new style 11.

A simple solution with a combined clip and clear PVC  re-usable holder that can rotate 360 degrees, and is raised  approx 15cm above the monitor top surface.

1.  Re-usable, to  slide in your own printed card/paper inserts

2.  Will clip onto any' flat screen' computer monitor up to 32mm thick

3.  Can be positioned on left, right or centre of the computer screen.

4.  Standard size holders:      210mm x 50mm,  210mm x 60mm,
                                                  250mm x 50mm, 250mm x 60mm

Other sizes may be available, please enquire.

Min order quantity is 25+
Sliding scale Discounts available for larger quantities.

 

STYLE 13 - A/TRAK SLIDE IN MONITOR NAME INSERT
STYLE 10 -  A/trak slide in name insert holder

STYLE 13   -  A/TRAK  COMPUTER MONITOR NAME INSERT HOLDER

Its been a while since we have added to the computer monitor range, but now we see our A/trak
re-usable slide in holder as a little different, but would easily fit into any office setting or desk layout.

This rigid durable RE-USABLE or interchangable insert holder would fit in perfectly with your sleek black or silver FLAT SCREEN computer display monitors.

Standard sizes are:      150mm wide  x 42mm high,
                                      210mm x 42mm
Other widths available - please enquire.

They accept up to a 38mm high SLIDE OR SLOT IN paper or card insert (not supplied), but come complete with a clear protective cover slip to protect the insert from dirt or grime. 

Also this style is slightly raised above the monitor top and attached by a narrow heavy duty self adhesive base.

NEW -    Style 13A - DOUBLE SIDED  COMPUTER NAME PLATE HOLDER OPTION

Whilst style 13 is gaining in popularity, we have been asked on numerous ocassions for a double sided version.  To this end we have developed style 13A.  It has similar features to style 13 and supplied in the same sizes but it is more adaptable in that it can be removed from its base and used as a free standing desk plate holder for moving from desk to desk or for more agile mobile working across work sites. (just take it with you)

STYLE 13A MONITOR NAME PLATE

STYLE 13B - Monitor name plate holder
Style 13B - Monitor Compact slimline

STYLE 13B - COMPACT AND SLIMLINE

With so many brands and style of computer monitor display screens we are constantly assessing the varieties of all our desk and office name plate holders.
More modern and contemporary monitors have taken over the bulky, unattractive designs of the past for elegant flat screen choices.
We try to ensure where possible that our products are in keeping with modern office environments and decor and our latest addition is no exception.
Style 13B is now part of the Style 13 family, again with similar features, in materials and sizes.
This however is only available as a DOUBLE SIDED slide in and out version but its main feature is that it will fit nicely on the top of the slimest of flat screen computer monitors. typicaly 12mm deep.

  •   Re-usable/interchangeable slide in and out style.
  •   Sizes:   150mm x 42mm high  (to take a 38mm high name insert)
                    and 210mm x 42mm high as above.
                    Minimum depth of top of computer is 12mm.
     
  •   Comes complete with a clear protective cover slip to cover your paper/card inserts.
  •   Double sided, slide in name insert sections on both sides.
  •   Low minimum order quantity of just 30 off.